PB DownForce was tested and worked on Windows XP and Windows 7 32-bit although it still was quite random to which machines worked and which showed no change or produced an error. 64-bit Windows is not supported in any free hard drive spoofing tools we came across. The spoofed serial will return to normal after a reboot.
change serial number on flash drive
To obtain support for your server module, you need the serial number ofthe Sun Blade 6000 modular system in which the server module is located,not the serial number of the server module. The serial number of themodular system is provided on a label on the upper left edge ofthe front bezel.
USB converters based on CP210x chip set with software CP210xSetIDs.exe, download Direct link CP211x Device Customization Software. These chips have a default sn 0001. We need to change to other unique number. On last picture is sn changed to 7301.
Has the location of this utility changed? I'm having the same issue and need to update the serial number on Z400 with replacement motherboard. BIOS allows me to change the number, but the internal number (Reported by HP Advisor or auto-detect) is still not maching my serial number stickers on the machine.
This is a free utility that is used for editing the registry to ensure the serial number descriptor of each FTDI device is ignored during driver installation. This feature ensures any FTDI device connected to a USB port is given the same COM port number.
FTD2XXST is an EEPROM serialiser and testing utility for FT232 and FT245 devices. FTD2XXST is based on our D2XX drivers and will work on Windows 98, ME, 2000 and XP platforms. The latest release supports the extra features of the FT232BM and FT245BM devices as well as the AM series devices.
You can change the serial number of an existing Site Configuration of appliances configured as stand-alones or as a High Availability cluster. Changing the serial number is necessary in case of a return merchandise authorization (RMA) when an appliance has been replaced.
To re-use an appliance (for example, the one with the serial number you just removed), you must first perform a factory reset. For more information, see How to Recover a CloudGen WAN Hardware Appliance with a USB Flash Drive.
3) This is the ass kicker of them all...all those policies I just mentioned AREN'T tied to the firmware, the BIOS, or any of that (well they are but you'll see what I mean). They're all tied to your serial number. When you reset your Chromebook, go through the GUI Setup process, and right before the enrollment screen you see "Determining device configuration"...that's Google checking in with it's servers to see if your device is managed by a domain. So that's really hard to bypass. I can give you all a few extra suggestions to try, but don't get your hopes up. It's also just a policy called "Forced Re-Enroll" in the Admin Console. These things have security tighter than a bug's ass, but I guess that's why all of our G Suite admins are laughing at us right now, me included.
Hey there. Sorry if this is a duplicate post, I think my last one got deleted because I had to create an account. I have an HP Chromebook 14 G4 that was issued by my last job. I'm allowed to keep this one, but with enrollment it does me no good because I no longer have the token key from the little device they gave me 2 login. Also, it's very limited as to what you can install so I'm trying to wipe it. I was able to get through all of these steps including developer mode and confirm the product serial number changed. The device is still managed however. I think I may have chosen the wrong screw possibly? I also did not see a sticker around the copper, only a circle of silver dots on it. It almost looks like Braille. the Skrill remove was the only one that had a copper plate that was parsed in different sections. After looking at diagrams online I did not find a picture that looked anything like the inside of this laptop. Thoughts?
Alright so i hate to break it to all of you 6th/7th/8th graders but enrolled devices CANNOT BE BYPASSED it is tied to the chromebooks S/N meaning even if you do bypass it. It will connect to the district servers and find the computers serial number and force enroll it and bring you back down to where you started, unless you get into a admins console and untie the desired chromebook which would be hard unless you knew youre devices serial number. and even if you were tech savvy and changed the devices Serial number YOU WOULD BE CAUGHT, Because you would trip youre districts IT department they track all the chromebook serial numbers so moral of the story just dont even bother trying to bypass the restrictions.
Once I got those informations, I tried to follow this tutorial -to-change-and-flash-mac/ but I don't understand. Once I'm on the Ms-DOS I do not know what to do and plus the keyboard is in english when I use an AZERTY keyboard.
If you want to change the baud rate anyway, then the new rate willneed to be configured in the micro-controller (during makemenuconfig) and that updated code will need to be compiled andflashed to the micro-controller. The Klipper printer.cfg file willalso need to be updated to match that baud rate (see theconfig reference for details). Forexample:
This is a synonym for particle flash --serial firmware.bin.Note that at present only binaries can be flashed using this command.If you wish to flash from application sources, first use particle compile to compile a binary from sources.
If you have Device OS firmware with debugging enabled (which is the default on the Electron) then flashing via serial will fail unless debugging is disabled. You can disable debugging logs flashing Tinker via USB: particle flash --usb tinker.
Switches the server public key stored on the device's external flash. This command is important when changing which server your device is connecting to, and the server public key helps protect your connection. Your device will stay in DFU mode after this command, so that you can load new firmware to connect to your server. By default this will only change the server key associated with the default protocol for a device. If you wish to change a specific protocol, add --protocol tcp or --protocol udp to the end of your command.
How can I "pull" the serial number of the USB devise I Connect on the USB of the USB host of the Arduino , because I would like to use this information for Identifying who is who instead of NFC and Other methods because I think is is more Secure ,
I believe that most USB devices, including Mass Storage devices, are based on general purpose processors and can be re-programmed, including the serial number. That is how unscrupulous people change an 8GB flash drive to report itself as a 128GB flash drive and charge ten times as much for it.
Have you ever wondered how to format a USB on Mac? Fear not! Formatting USB drives on a Mac is actually a simple process. Many USB (often called flash drives) are plug-and-play for Mac these days. However, there are still a few USB drives that need formatting in order to work with your Mac OS. If you need to format a USB on Windows, the process is slightly different, but we can help with that too.
You will see the main window with a list of available storage devices on the left and various disk management options on the right. At the bottom of the main window are storage device details, including disk description, connection type, USB serial number, total capacity, write status, S.M.A.R.T. status, and partition map scheme.
Congratulations! You should be able to transfer files to the newly formatted flash drive. External SSDs such as the Crucial X8 are another way to clear space on a Mac ttps://author-microntech65prd.adobecqms.net/articles/mac-users/how-to-clear-space-on-a-mac or transfer files from one Mac to another, often offering more capacity and faster transfer speeds.
I've virtualised a server that has an application installed which is license bound to the original physical hard disk serial number. Is there a way of changing the serial number of a virtual disk or configure the serial number for a virtual disk when you add it to a VM?
Go to virtual machine configuration > Hardware > Boot Order > Advanced settings > in Boot flags field paste the flag below alongside with a new serial number next:
The USRP should now be able to communicate on the network (you'll see some LEDs light up and network link be established). The next step is to flash the device and program the serial number. Both these steps can be done with UHD (the JTAG step is complete).
The NAND type is found mainly in memory cards, USB flash drives, solid-state drives (those produced since 2009), feature phones, smartphones, and similar products, for general storage and transfer of data. NAND or NOR flash memory is also often used to store configuration data in numerous digital products, a task previously made possible by EEPROM or battery-powered static RAM. A key disadvantage of flash memory is that it can endure only a relatively small number of write cycles in a specific block.[2]
Flash memory[3] is used in computers, PDAs, digital audio players, digital cameras, mobile phones, synthesizers, video games, scientific instrumentation, industrial robotics, and medical electronics. Flash memory has fast read access time, but it is not as fast as static RAM or ROM. In portable devices, it is preferred to use flash memory because of its mechanical shock resistance since mechanical drives are more prone to mechanical damage.[4]
Because erase cycles are slow, the large block sizes used in flash memory erasing give it a significant speed advantage over non-flash EEPROM when writing large amounts of data. As of 2019,[update] flash memory costs much less[by how much?] than byte-programmable EEPROM and had become the dominant memory type wherever a system required a significant amount of non-volatile solid-state storage. EEPROMs, however, are still used in applications that require only small amounts of storage, as in serial presence detect.[5][6] 2ff7e9595c
Comments